No Review
🚚Free Shipping | Order Above 500 Dhs |
🏷Price | Cheap Price in Dubai, UAE |
⏰On-Time Delivery | Delivery Before Time |
☝Safe Payments | Secure SSL encryption |
❎ No Hidden Charges | Without extra fees |
The latest Insteon plug-in module, I/O Linc, lets you monitor and control any low voltage devices such as alarm sensors, electric door strikes, and contact closures as part of your Insteon home automation network. With one dry-contact sensor input you can control many Insteon devices throughout the house. Plus, use the built-in single-pole double-throw (SPDT) switch, connect any low voltage-powered device for continuous or momentary operation. Create your own remote-control door lock using an electric door strike and power supply or use a security sensor turn Insteon controlled lights on or off.
Required Accessories
Sensor wire: 16 - 28 gauge wire fits, but 20 - 22 gauge recommended
I/O Linc's flexible output relay can control many different types of low voltage devices, from pool valves to electric door strikes to garage doors due to its different relay modes. When controlling devices like pool valves, you will want the ability to leave it on for an extended period of time, giving it plenty of time to fill the pool. As it approaches the desired water level, then you can remotely turn it off. For devices like electric door strikes, set I/O Linc's output relay to momentary, allowing you open the front gate using a RemoteLinc or any other Insteon controller. A third version of I/O Linc's momentary mode allows you to remotely press your garage door button with an Insteon On command, but only if your garage is currently closed. This allows you to open your garage with On command and close it with an Off command. Because I/O Linc uses a garage door sensor to know whether the door is open or closed, it only controls the garage when it needs to.
Controlling Two Separate Loads
With the addition of a DPDT Relay Board, the I/O Linc is capable of switching two separate loads on and off together. In this configuration, the I/O Linc could control two different loads of varying voltages (i.e. one high voltage and one low voltage load) or two higher current loads (up to 7A @30VDC each).
General | ? |
Manufacturer | Insteon |
Manufacturer Product No. | 2450 - (Each) 2450-5PK - (5-Pack) |
UPC | 689076403542 - (Each) 810026640049 - (5-Pack) |
FCC ID | SBP26722A |
Certifications | FCC, IC Canada |
Patent No. | Patent No. 7,345,998, International patents pending) |
Warranty | 2 Years |
Insteon Features | ? |
Insteon Addresses | 1 hard-coded out of 16,777,216 possible |
Insteon Links | 417 |
Insteon Powerline Frequency | 131.65 KHz |
Insteon Minimum Transmit Level | 3.2 Vpp into 5 Ohms |
Insteon Minimum Receive Level | 10 mV |
Insteon Messages Repeated | Yes |
Operation | ? |
Status LED | Yes |
Insteon RF mesh repeater | White (Bright when relay closed, dim when relay open) |
Sensor Status LED | Green (On when sensor closed, Off when sensor open) |
Set Button | Toggles output relay On/Off. Also used for setup |
Momentary Duration | Locally Adujtable: 2 Seconds to 30 Minutes Software Adjustable, .2 Seconds - 105 minutes |
Operation Modes | Insteon |
Multi-Way Circuit Support | Yes |
Setup Memory | Non-volatile EEPROM |
Mechanical | ? |
I/O Terminals | 5V DC (10mA) GND Sense N/O Common (28-16 gauge wire) |
Input jack | 1/8" mini jack input (GND, Sense) |
Input Type | Contact closure only |
Output Relay Capacity | Standard, single gang wall box |
Operating Conditions | Indoors: 32 to 104? up to 85% relative humidity |
Dimensions | 4.5" H x 2.5" W x 1.5" D |
Weight | 4.6 oz |
Electrical | ? |
Voltage | 120 Volts AC +/- 10%, 60 Hertz, single phase |
Sensor Input | 1/8" mini jack input (GND, Sense) |
Power Plug | 3-pin grounded |
Retains all settings without power | Yes, saved in non-volatile EEPROM |
Pass-through Outlet | Uncontrolled 3-prong (with ground), 120V, 15A |
Power Consumption | 0.93 Watts |
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.