Manage Complex Wiring Circuits with DIN Rails and the Insteon DIN Rail Dimmer Simply clip onto 35mm DIN rail and wire like any other Insteon dimmer Dimmer with 32 brightness levels and 32 ramp rates Optional sense wires allow for control via a connected, hard-wired switch Compatible with latching,?
| 🚚Free Shipping | Order Above 500 Dhs |
| 🏷Price | Cheap Price in Dubai, UAE |
| ⏰On-Time Delivery | Delivery Before Time |
| ☝Safe Payments | Secure SSL encryption |
| ❎ No Hidden Charges | Without extra fees |
?
When planning the electrical wiring for your home or business, avoid adding too many wall switches in a single location. Wall switches ganged together cause homeowner confusion and can quickly ruin the aesthetic of a room. Instead consider adding a single Insteon keypad to control all the lighting. It's easy when combined with Insteon DIN Rail products.
Use of DIN rails is common overseas and in US commercial/industrial buildings. Because of their ease of installation, DIN rails are becoming more popular in the US. DIN rail products provide integrators and builders a more custom and organized way to handle complicated wiring circuits.
The DIN Rail Dimmer clips directly onto a 35mm DIN rail and wires to load, power and neutral. Link it to an Insteon keypad or any other Insteon device for full remote control over the module and it's connected load. Specifically, DIN rail Dimmer is compatible with the "Top hat rail EN 50022" (sometimes referred to as a Type O or Type ?) The DIN Rail Dimmer will fit either variation of this style DIN rail (either 15 or 7.5 mm "high" off the mounting surface).
What's a DIN Rail?
It is simply a metal rail on which compatible products (circuit breakers, switches, etc.) can be snapped on. The DIN rail can simply be mounted to any flat surface (or even across studs). Please follow all applicable building and electrical codes whenever installing electrical products.
Please note that the DIN Rail Dimmer is not compatible with C section or G section Din rails.
Optional Sense Wire Trigger
The DIN Rail Dimmer features sense inputs for special applications where a local "dumb" switch might be necessary in addition to remote Insteon control. Sense inputs are compatible with latching, single momentary and dual momentary wall switches. Connect to any style wall switch to match any type of designer theme (antique, push-button, metal, etc.)
Local Control and Insteon Setup
The DIN Rail Dimmer has a small paddle that operates exactly the same as the best-selling SwitchLinc paddles. So, you can turn the connected load on, off or control its brightness by pressing and holding the paddle. Furthermore, a setup button is provided for setting up other properties as well as for linking and un-linking. Finally a dual-color (green and red) LED displays the on (green) or off (red) status of the connected load.
| General | ? |
| Manufacturer | Insteon |
| Manufacturer Product No. | 2452-222 - (Each) 2452-222-5PK - (5-Pack) |
| UPC | 813922012798 - (Each) 813922019698 - (5-Pack) |
| Safety Approval(s) | ETL |
| Certifications | FCC |
| FCC ID | SBPDR01 |
| Warranty | 2 Years |
| Insteon Features | ? |
| Operation Modes | Controller and responder |
| Maximum Links/Scenes | 400 |
| Load Brightness Levels | 32 locally (256 with software) |
| Status LED | Green when load is on, Red when load is off Blinks Red once when responder does not acknowledge/blinks Green once if all responders acknowledge (can be disabled via software) Blinks Green or Red during setup Blinks Red or Green (depending upon state of load) to indicate traffic (must be enabled via software) |
| LED Brightness | Adjustable from off to 100% bright |
| Local On-Level | Adjustable from 32 fixed brightness levels or resume dim |
| Local Ramp Rate | Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software) |
| Local Control | Yes |
| Commands Supported Controller | On | Off Fast On | Fast Off Begin Brighten | End Brighten Begin Dim | End Dim |
| Commands Supported as Responder | On | Off Fast On | Fast Off Begin Brighten | End Brighten Begin Dim | End Dim Incremental Brighten | Incremental Dim Beep |
| Software Configurable | Yes |
| Ramp Rates (full-On to full-Off) | 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely via software |
| RF Range | 150 ft. (depending on your homes construction) |
| Phase Detect Beacon | Yes |
| Insteon Device Category | 0x01 dimmable lighting control |
| Insteon Device Subcategory | 2452-222 (915MHz) | 0x34 |
| Mechanical | ? |
| Mounting | 35mm (top hat) DIN rail |
| Wire Connections | N/A |
| Max. Cable Size | 4mm?2;, 12 AWG (2.72mm diameter) |
| Min. Cable Size | 1.5mm?2;, 15 AWG |
| Screw DIN Rail Connections | Line Neutral Load Sense 1 Sense 2 |
| Case Color | White |
| Set Button | Yes |
| Plastic | UV stabilized polycarbonate |
| Beeper | Yes |
| Beep On Button Press | Optional (off by default) |
| LED | 1 RGB |
| Dimensions(H x W x D) | 3.14" x 2.05" x 2.48" |
| Weight | 6.17 oz (175g) |
| Operating Environment | Indoors |
| Operating Temperature Range | 32? to 104?F (0? to 40?C) |
| Operating Humidity Range | 0-90% relative humidity |
| Storage Temperature Range | -4? to 158?F (-20? to 70?C) |
| Electrical | ? |
| Voltage | 100VAC to 240VAC |
| Load | Min. 5W, Max 300W at 100-240VAC |
| Load Types | Resistive Low voltage halogen Incandescent |
| User Replaceable Fuse | Yes |
| Hardwired Remote Control | Yes, either latching or momentary switches supported |
| Retain All Settings Without Power | Yes, saved in non-volatile EEPROM |
| Standby Power Consumption | <1W |
?
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
